The description of SCB10 epoxy resin cast dry type transformer
SCB10 epoxy resin cast dry type transformer is an update of SCB9. The transformer material is of high quality and scientific formula, and is produced by advanced production testing equipment according to strict technology. The SCB10 epoxy resin cast dry type transformer has the characteristics of high reliability and long service life. Depending on the use environment, shells with different protection levels can be configured or not. SCB10 epoxy resin cast drytype transformer can be used as a replacement product of oil-immersed transformer, suitable for high-rise buildings, commercial centers, airports, tunnels, chemical plants, nuclear power plants, ships and other important or special environmental places.
The features of SCB10 epoxy resin cast dry type transformer
1. Compared with SCB9 type, SCB10 epoxy resin cast dry type transformer has lower no-load loss, no-load current and noise. 2. Safe, fireproof, non-polluting, can be directly operated in the load center. 3. High mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, and long service life. 4. Good heat dissipation performance, strong overload capacity, can increase capacity operation when forced air cooling. 5. Good moisture resistance, suitable for operation in high humidity and other harsh environments. 6. Can be equipped with a complete temperature monitoring and protection system. The intelligent signal temperature control system can automatically monitor and display the respective working temperature of the phase windings on the same screen. It can automatically start and stop the fan, and has functions such as alarm and trip. 7.Small size, light weight, small space occupation, low installation cost.
SCB10 epoxy resin cast dry type transformer core is made of high-quality low-loss grain-oriented silicon steel sheet with low no-load loss, low no-load current and low noise. The fuel tank has a sturdy structure and can withstand an atmospheric pressure test. There is no oil storage tank on the tank cover for safety. High and low voltage cable junction boxes are welded on both sides of the tank wall for cable connection. The high voltage coil has a rated voltage and ± 5. % Of the tap voltage, use the tap switch to change the voltage. When changing the voltage, you must first cut off the power, and then remove the rain cover of the tap switch on the wall of the box to change the tap. The low-voltage side of theSCB10 epoxy resin cast dry type transformer allows "Y" to be connected to 690 volts for power supply, or it can be changed to "△" for 400 volts for power supply. The secondary terminals are led out of the six porcelain sleeves in the cable junction box for users to change. The whole SCB10 epoxy resin cast dry type transformer is hoisted by the welding of the box wall. The bottom of the transformer box is equipped with a skid. There are mounting holes on the skid, which can be used to install mine cart rollers.