The difference between Filament Wound Epoxy Tubes and ordinary epoxy tube
The Filament Wound Epoxy Tubes is formed by impregnating an electric-grade alkali-free glass fiber with a resin through a mold and then being subjected to a microcomputer-controlled winding molding, which is mainly used as an insulating component in an electronic device, and an environmental requirement for the use of an Epoxy for Filament Winding. Very low, dry, hot and humid places can work properly.
The difference one:
High temperature resistance. Epoxy fiberglass wound tubes have a high temperature rating of Class B, 155 ° C, and some properties are particularly good, such as the model G11 can reach 180 degrees Celsius. Because it is used in electronic products, high temperature resistance is a necessary condition.
Difference two:
Good dielectric properties. The epoxy glass fiber wound tube is an insulating material, and the parallel layer has a breakdown voltage of ≥40KV, which can be used in high-power electrical appliances, and is not easily broken by voltage for continuous operation for a long time.
The difference is three:
Good mechanical properties. Epoxy glass fiber winding tube has high strength, fatigue resistance, good toughness and no deformation
Difference four:
Strong plasticity. Filament Wound Epoxy Tubes are processed in a variety of ways, can be cut, ground, perforated, and have strong plasticity. As long as there are drawings, they can be manufactured into the required pattern.
Difference five:
Environmental protection. The development of industry has also accelerated the discharge of sewage and waste gas. We must develop industry on the basis of environmental protection. The halogen-free epoxy tube does not contain toxic substances, which ensures the health of the user while cleaning the environment.
Difference six:
For acids, alkalis, salts, oils, alcohols and other chemicals, there is also a certain ability to adapt, and it is particularly corrosive to affect it.
The difference one:
High temperature resistance. Epoxy fiberglass wound tubes have a high temperature rating of Class B, 155 ° C, and some properties are particularly good, such as the model G11 can reach 180 degrees Celsius. Because it is used in electronic products, high temperature resistance is a necessary condition.
Difference two:
Good dielectric properties. The epoxy glass fiber wound tube is an insulating material, and the parallel layer has a breakdown voltage of ≥40KV, which can be used in high-power electrical appliances, and is not easily broken by voltage for continuous operation for a long time.
The difference is three:
Good mechanical properties. Epoxy glass fiber winding tube has high strength, fatigue resistance, good toughness and no deformation
Difference four:
Strong plasticity. Filament Wound Epoxy Tubes are processed in a variety of ways, can be cut, ground, perforated, and have strong plasticity. As long as there are drawings, they can be manufactured into the required pattern.
Difference five:
Environmental protection. The development of industry has also accelerated the discharge of sewage and waste gas. We must develop industry on the basis of environmental protection. The halogen-free epoxy tube does not contain toxic substances, which ensures the health of the user while cleaning the environment.
Difference six:
For acids, alkalis, salts, oils, alcohols and other chemicals, there is also a certain ability to adapt, and it is particularly corrosive to affect it.